|
Wood Grades & Specifications
(Click Here)
Appalachian Lumber
5879 West US Hwy 421 /
421 Commercial Park Wilkesboro, NC 28697
Ph (888) 910-WOOD
Fax (336) 973-8356
Click
HERE for a species and
approximate color chart.
Want to
see our Moulding Profiles?
(Click Here)
Glossary
of
Industry Terms
(Click Here)
 |
At Appalachian Lumber we
specialize in architectural grades of
plank flooring. Plank
floors are traditionally made out of a higher grade of
lumber than the commodity strip flooring. This allows us
to attain the widths and lengths we desire in our
flooring
 products.
Our boards are 3/4" and are unfinished. The lumber used
for the flooring is kiln dried to approximately 8%
moisture content. The widths of our flooring range from
3" to 11" face width, with a 3"-4"-5" pattern being our
standard average. Lengths vary depending on species from
around 4' to over 8'. Lengths will range from 1' to 16'.
All our products, flooring and paneling, are available
in square edge or v-joint. The product is tongue and
groove and end matched for easy installation, sold by
the square foot and relief plowed on the bottom of the
board for stabilization. The waste factor on standard
products with common installation is 0 to 2%.
Our floors are widely used in fine homes across the
country continue to be applauded by architects,
designers, contractors and homeowners for their quality
and appearance.
 Our
Available Species Are:
White Pine
Yellow Pine
Ash
Locust
Hickory
Wormy Red Oak
Red Oak
Rift & Quarter Sawn Red Oak
Rift & Quarter Sawn White Oak
Wormy Maple
Soft Maple
Hard Maple
Curly Maple
 Brazilian
Cherry
Cherry (American)
Walnut (American)
Peruvian Walnut
Santos Mahogany
Please consider Appalachian Lumber
as you invest in plank flooring for your new home,
addition, renovation or commercial project.
Don't hesitate to contact us for a
brochure, samples or if you have questions. We'd love to
have the opportunity to serve you.
|
